DRG010 Grooved End Cap (eccentric hole)
| Size | 100mm (4") with 25mm (1") hole |
|---|---|
| Working pressure | 20.7 bar (300 psi) |
| Finish | Galvanised |
Rapidrop grooved end caps are usually installed at the end of a pipe run or on the top of a dry or wet riser, the 1" (25mm) hole is to accommodate a 1" (235mm) air release valve
Dimensions
| Nominal Size | 100mm (4") |
| Pipe O.D | 114.3mm (4.500") |
| Dimensions (L) | 25mm (0.99") |
